Shower rooms are a place of solitude in your home. It is where you can rest and relax after having a long and stressful day. Showers give you some alone time to think and reflect on the day that was or get ready for the day that will come.
However, shower rooms or bathrooms are also one of the most vulnerable areas in a home. When improperly cleansed and taken care of, they become a breeding ground for an unhealthy environment due to the formation of moulds and mildew.
Superior Waterproofing offers shower waterproofing in Brisbane and Gold Coast to help you deal with the issues caused by permeable shower walls and floors.
You Don’t Want Moulds in Your Showers
Indoors with poor ventilation and moist areas like shower rooms are susceptible to mould growth. When this happens, the occupant’s health is at risk—as they may experience a runny nose, blocked nose, wheezing, and/or skin irritation due to direct exposure.
Don’t worry! Moulds aren’t invisible, and you can certainly detect their presence in your shower room through some signs.
One common indication is when there are dark spots in your tile grout. You can also tell if there are moulds if your bathroom smells old and musty and if the floor feels soft and spongy.
How Can You Prevent Mould Growth?
Controlling moisture and dampness in your shower room is a proven way to prevent moulds from growing. That is why it is crucial to clean your shower rooms regularly and, most importantly, ensure that their surfaces are waterproofed.
Shower waterproofing is a method to prevent water from seeping through the grout of the tiles in the shower room. In short, this serves as a barrier against water permeation.
Different Shower Waterproofing Methods
1. Use of Liquid Membranes
On top of the list is the use of liquid membranes. This liquid-based coating is considered the easiest and cheapest method of waterproofing used in shower rooms or bathrooms. Before applying this, though, one must consider the mil thickness, cure times, and mud beds.
It is best to apply liquid membranes with more than one coat to make sure that there will be no water ingress.
Liquid membranes are sprayed or applied to the concrete wall or floor through a brush or roller. This could penetrate up to a depth of 20 mm, creating a barrier against water seepage. Liquid membranes assure longevity when properly applied before tiling, despite being the easiest method to waterproof. Moreover, it is also low maintenance and cost-effective.
2. Use of Sheet Membranes
Another method is the use of sheet membranes. This is done with a mortar or other adhesive laid over a surface. What makes sheet membranes better than liquid membrane is that this is visible to anyone.
As mentioned earlier, the thickness of the coating or the membrane used for waterproofing is a crucial consideration. With the sheet membranes, you’ll have an assurance that they have a similar thickness. Why? These sheets come in rolls before the professionals apply them onto the surface, unlike the liquid membranes.
3. Use of Foam Wallboards
These wallboards are normally used as tile backers, ensuring the stability of the tiles in your shower room. The good thing about this is you will no longer install a cement board before waterproofing since this can already stand and is waterproof.
So, Why Is Shower Waterproofing a Priority?
Aside from the fact that water permeation can ruin your shower room, this also poses a risk to one’s health. For residential houses, water ingress and egress can put your family members at risk. On the other hand, it may also portray a negative image for commercial buildings because of sanitation concerns, setting aside the possible monetary expenses you will have for repair.
Imagine. You are living in a two-story house with shower rooms on the second floor, and you fail to recognise the presence of mould in your bathrooms. If the water can penetrate the floor, this would damage the ceiling of the living room below.
Shower waterproofing should be a priority, regardless if you are a homeowner, a renter, or a building owner. Nevertheless, you must let a professional handle waterproofing, as this process has a lot to consider. Feel free to avail yourself of our shower waterproofing in Brisbane and Gold Coast for a guaranteed way to protect your structure!
Looking for Shower Waterproofing in Brisbane and Gold Coast? We Got You!
Aside from prioritising waterproofing, you must ensure that this is done correctly and by a professional. When done incorrectly, there may be instances wherein the lack of waterproof membrane applied to the surface will cause loose tiles and water and structural damage.
At Superior Waterproofing, we aim to give our clients high-quality results while ensuring that our waterproofing solutions will last longer.
Call us at +61468760750 or send an email to info@superiorwaterproofing.com.au for more details about our shower waterproofing or shower sealing in Gold Coast and Brisbane.